Tag Data Sheet

Tag

£0.00 GBP inc.VAT 

Share:
TAG BODY ART AUSTRALIA 

1. Chemicalproductandcompanyidentification

DESCRIPTION: Aquacolour face & body paints, Regular and Pearl Colours. PRODUCT TYPE: Paste cake type paints
APPLICATION: Colourful on body and face
Manufacturer, supplier information.

Company Name: TAG Body Art
Company Address: PO Box 982, Nairne SA 5252 Australia Telephone: +61 8 83886893

POISON CONTROL CENTRE: Tel 131126 (AUS)

2. Composition, Information on ingredients

Paints formulated with Wax, Petrolatum, Glycerine, Calcium Carbonate, Stearyl Alcohol, Sodium Bensozate, Acacia Senegel, Dextrin, Water, Perfume and Pigments
Contains no hazardous ingredients.

3. Hazards Identification

3.1 HMIS Rating 4 = severe

3 = serious
2 = moderate 1 = slight
0 = minimal

HEALTH 0 FLAMMABILITY 0 REACTIVITY 0

3.2 Potential Health Effects

Immediate Hazards

INGESTION: No hazards known INHALATION: No hazards known SKIN: No hazards known EYES: No hazards known

Delayed Hazards

No hazards known

4. First Aid Measures

INGESTION: Not expected to require first aid measures. If large amounts are swallowed, give water to drink and get medical advice.
EYES: Immediately flush eyes with plenty of water.
SKIN: Wash the skin with soap and water.

INHALATION: Remove to fresh air. Seek medical attention for any breathing difficulties.

5. Fire Fighting Measures

Auto –ignition Temperature Upper / Lower Flammable Limits Upper / Lower Explosive Limits Flash Point
Will not burn unless > 250°C

Not Available Not Available Not Available >150°C

Suitable Extinguishing Media: Carbon Dioxide, Powders, Water Spray

6. Accidental Release Measures

Protective Measures: Children under 6 years should use with adult supervision.

7. Handling and Storage

7.1 Handling
Handle in accordance with good industrial hygiene and safety practices.

7.2 Storage Store in a cool, dry place.

8. Exposure Controls / Personal Protection

8.1 Exposure Controls
No specific control measures necessary under normal conditions of use.

8.2 Personal Protection No special protection necessary. 8.3 Exposure Guidelines

None established.

9. Physical and Chemical Properties

Percent Volatiles
PH @ 20
Specific Gravity Appearance
Auto – ignition Temperature Melting Point

Vapour Density (Air =1)

Vapour Pressure hPA @20
Evaporation Rate (Butyl Acetare = 1) Upper/ Lower Explosive Limits, % by Vol Upper/ Lower Flammable Limits
Flash Point
Freezing Point

Odour
Odour Threshold .ppm
Solubility in Waer
Coefficient of Water/ Oil Distribution

10. Stability and Reactivity

Normally Stable
Conditions to avoid:

Over exposure to water, or too wet Incompatibilities:

<1.5% Water --------
1.70 ± 0.30g/ml Colours Solid Not available >250°C

---------

N/A kg/cm Not Available Not Available Not Available >150°C ----------

Mild, Fruity Not available Soluble
Not Available

None Known
Decomposition Products may include:

Calcium Oxide, Water, Carbon Dioxide Hazardous polymerization:

Will not occur
Other Hazards:

None Known

11. Toxicological Information

There is no data available on the preparation itself.

12. Ecological Information

There is no data available on the preparation itself.

13. Disposal Consideration

Dispose of according to Local, State/ Provincial and Federal requirements.

14. Transport Information

14.1 US: Department of Transportation (DOT)
The data provided in the section is for information only and may not be specific for your package size. You will need to apply to the appropriate regulators to properly classify your shipment for transportation. NOT REGULATED

14.2 Canadian Transportation of Dangerous Goods NOT REGULATED

15. Regulatory Information (Selected Regulations)

15.1 US Federal Regulation:
These Paint Products CONFORMS to the health requirements of ASTM D-4236 and FDA. These products must bear the following statement: “Conforms to ASTM D-4236.”

15.2 Canadian Regulations: Unknown

15.3 These paint products conform to EU 76/768/EEC, and CE EN – 71. 15.4 These paint products pass – BAM, 8th Edition by FDA.



Material Safety Data Sheet TAG BODY ART AUSTRALIA

1. Chemicalproductandcompanyidentification

DESCRIPTION: Aquacolour, Neon Colours. PRODUCT TYPE: Paste cake type paints APPLICATION: Colourful paint
Manufacturer, supplier information.

Company Name: TAG Body Art
Company Address: PO Box 982, Nairne SA 5252 Australia Telephone: +61 8 83886893

POISON CONTROL CENTRE: Tel 131126 (AUS)

2. Composition, Information on ingredients

23/02/11

Paints formulated with Wax, Petrolatum, Glycerine, Calcium Carbonate, Stearyl Alcohol, Sodium Bensozate, Acacia Senegel, Dextrin, Water, Perfume and Non Toxic Fluorescent Pigments. Contains no hazardous ingredients.

3. Hazards Identification

3.1 HMIS Rating 4 = severe

3 = serious
2 = moderate 1 = slight
0 = minimal

HEALTH 0 FLAMMABILITY 0 REACTIVITY 0

3.2 Potential Health Effects

Immediate Hazards

INGESTION: No hazards known INHALATION: No hazards known SKIN: No hazards known EYES: No hazards known

Delayed Hazards

No hazards known

4. First Aid Measures

INGESTION: Not expected to require first aid measures. If large amounts are swallowed, give water to drink and get medical advice.
EYES: Immediately flush eyes with plenty of water.
SKIN: Wash the skin with soap and water.

INHALATION: Remove to fresh air. Seek medical attention for any breathing difficulties.

5. Fire Fighting Measures

Auto –ignition Temperature Upper / Lower Flammable Limits Upper / Lower Explosive Limits Flash Point
Will not burn unless > 250°C

Not Available Not Available Not Available >150°C

Suitable Extinguishing Media: Carbon Dioxide, Powders, Water Spray

6. Accidental Release Measures

Protective Measures: Children under 6 years should use with adult supervision.

7. Handling and Storage

7.1 Handling
Handle in accordance with good industrial hygiene and safety practices.

7.2 Storage Store in a cool, dry place.

8. Exposure Controls / Personal Protection

8.1 Exposure Controls
No specific control measures necessary under normal conditions of use.

8.2 Personal Protection No special protection necessary. 8.3 Exposure Guidelines

None established.

9. Physical and Chemical Properties

Percent Volatiles
PH @ 20
Specific Gravity Appearance
Auto – ignition Temperature Melting Point

Vapour Density (Air =1)

Vapour Pressure hPA @20
Evaporation Rate (Butyl Acetare = 1) Upper/ Lower Explosive Limits, % by Vol Upper/ Lower Flammable Limits
Flash Point
Freezing Point

Odour
Odour Threshold .ppm
Solubility in Waer
Coefficient of Water/ Oil Distribution

10. Stability and Reactivity

Normally Stable
Conditions to avoid:

Over exposure to water, or too wet Incompatibilities:

<1.5% Water --------
1.70 ± 0.30g/ml Colours Solid Not available >250°C

---------

N/A kg/cm Not Available Not Available Not Available >150°C ----------

Mild, Fruity Not available Soluble
Not Available

None Known
Decomposition Products may include:

Calcium Oxide, Water, Carbon Dioxide Hazardous polymerization:

Will not occur
Other Hazards:

None Known

11. Toxicological Information

There is no data available on the preparation itself.

12. Ecological Information

There is no data available on the preparation itself.

13. Disposal Consideration

Dispose of according to Local, State/ Provincial and Federal requirements.

14. Transport Information

14.1 US: Department of Transportation (DOT)
The data provided in the section is for information only and may not be specific for your package size. You will need to apply to the appropriate regulators to properly classify your shipment for transportation. NOT REGULATED

14.2 Canadian Transportation of Dangerous Goods NOT REGULATED

15. Regulatory Information (Selected Regulations)

15.1 US Federal Regulation:
These Paint Products CONFORMS to the health requirements of ASTM D-4236. These products must bear the following statement: “Conforms to ASTM D-4236.”

15.2 Canadian Regulations: Unknown

15.3 These paint products conform to EN – 71.

Our brands