DFX Data Sheet

Diamond FX

£0.00  

Share:
DIAMOND FX FACE ART

Water Based Make Up / Face Paint Products (Hydrocolors)

Diamond FX Face Art & FX products are manufactured in accordance with FDA and European Union guidelines. Diamond FX products conform to the USA ASTM D 4236 and European 76/768/EEC. The components and end resulting products are just as safe to use on the face and body as any good cosmetic. The ingredients meet cosmetic guidelines for both the United States and European Community and are designed to be used on children and adults.

The data presented in this “Material Safety Data Sheet” represents the safety information on each component of our products. The components, as a final commodity, are stable, easy on the skin, and wash off with soap and water. Make- up can also be removed using petroleum jelly or baby oil.

Like most make-up, dark colors on some people may leave a bit of residue on the skin for a few hours after washing. This also depends on how long the make-up remains on the skin and the type of complexion of the person. The FDA recommends that all red make-up be kept at least one half inch from eyes.

PRODUCT
INGREDIENTS Water
Based Products
Our products contain some or all the following

ingredients:
Calcium Carbonate, Paraffin Wax, Petrolatum, Dextrin, Glycerin, Stearyl Alcohol, Water,

Products Contain All of These Ingredients

PRODUCT NAME

FORMULA

HEALTH

FLAMMABILITY

REACTIVITY

FIRST AID MEASURES

CAS Number

Calcium Carbonate

CaCO

0

0

0

A

CAS# 471-34-1 EINECS# 207-439-9

Paraffin Wax

N/A

0

1

0

C

CAS# 8002-74-2 EINECS# 232-325-6

Petrolatum

N/A

1

1

0

C

CAS# 8009-03-8 EINECS# 232-373

Dextrin

(C6H10O5)n.xH2 O

1

1

0

C

CAS# 9004-53-9 EINECS# 232-675-4

Glycerin

N/A

1

0

0

D

CAS# 56-81-5 EINECS# 200-289-5

Stearyl alcohol

C18-H37-OH

1

1

0

A

CAS# 112-92-5 EINECS# 204-017-6

Water

H2O

0

0

0

N/A

CAS# 7732-18-5 EINECS# 231-791-2

Acacia Senegal Gum

C18H38O

1

1

0

H

CAS# 9000-01-5 EINECS# 232-519-5

Sodium Benzoate

C7-H5-O2-Na

2

1

0

H

CAS# 532-32-1 EINECS 206-534-8

Disodium EDTA

C10H14N2O8Na2 • 2H2O

0

1

0

B

CAS# 6381-92-6 EINECS# 205-358-3

Perfume- Musk RO 7562 (Trace)

Hydroxy- methylpentylcycl o- hexenecarboxald ehyde

N/A

N/A

N/A

G

CAS# 31906-04-4 EINECS# 250-863-4

Hazard

Rating:
Least Slight Moderate High Extreme

0 1 2 3 4

Continued

Diamond FX Face Art Water Based Make Up / Face Paint Products (Hydrocolors)

Diamond FX ’s color additives are strictly regulated. In order to protect consumers from harmful contaminants, some colors require FDA certification. These colors come from batches that are certified by FDA. Each batch is provided with its own individual certification lot number. Our color additives meet FDA color additive guidelines and the European Cosmetic Products 76/768/EEC Council Directive. Non Toxic Fluorescent Pigments are used in some colors. Our Products will contain one or more of these ingredients.

TECHNICAL INFORMATION on COLOR ADDITIVES

United States FDA name

European CI Number

Japanese name

Color Index name

CAS #:

General name

D & C Red No.27

C.I. 45410

Red No.218

Solv. Red 48

13473-26-2

Tetrachlorotetrabromofluorescein

D & C Red No.7 & No.6

CI 15850 CI 15850-1

Red No 202

Pig Red 57

5281-04-9

Red Number6 / 7 Lake

FD & C Blue No.1

C.I. 42090

Blue No.1

Food Blue 2

3844-45-9

Brilliant Blue

FD & C Blue No.4

C.I. 42090

Bleu 204

Food Blue 4

3844-45-9

Acid Blue 6

D & C Black 2

C.I. 77266

Carbon Black

Pigment Black 6

1333-86-4

Carbon Black

FD & C Yellow No.5

C.I. 19140

Yellow No.4

Acid Yellow 23

1934-21-0

Tartrazine

Ultramarines

CI 77007

Ultramarine

Ultramarine

57455-37-5

Ultramarine

Ferric Ferrocyanide

CI 77510

Ferric Ferrocyanide

Pigment Blue 27

14038-43-8

Ferric Ferrocyanide

Iron Oxides

CI 77491

Red Oxide of Iron

Iron Oxide

1309-37-1

Iron Oxides (Red)

Titanium Dioxide

CI 77891

Titanium Dioxide

Pigment White 6

13463-67-7

Titanium Dioxide

Mica

CI 77019

Mica

Mica

12001-26-2

Mica

Bismuth Oxychloride

CI 77163

Bismuth Oxychloride

Bismuth Oxychloride

7787-59-9

Bismuth Oxychloride

FDA COLOR ADDITIVES FACT SHEET

US. Food and Drug Administration Center for Food Safety and Applied Nutrition Office of Cosmetics and Colors Fact Sheet July 30, 2001

COLOR ADDITIVES FACT SHEET

The FDA separates color additives into two categories. These are colors that the agency certifies (derived primarily from petroleum and known as coal-tar dyes) and colors that are exempt from certification (obtained largely from mineral, plant, or animal sources). Only approved substances may be used to color foods, drugs, cosmetics, and medical devices.

The FDA requires domestic and foreign manufacturers of certain colors to submit samples from each batch of color produced. FDA scientists test each sample of these colors to confirm that each batch of the color is within established specifications. These certified colors are listed on labels as FD&C, D&C or external D&C. Using the uncertified versions of color additives that require certification is illegal in foods, drugs, cosmetics, and medical devices.

The color certification program is self-supporting because the law requires manufacturers to pay FDA a user fee for each pound of color the agency certifies. In Fiscal Year 2000 FDA certified more than 13 million pounds of color additives.

For further information contact: Diamond FX Face Art. www.diamondfx-faceart.eu Updated: 01/08/2008

FIRST AID RECOMMENDATIONS

A

Generally not hazardous in normal handling, however good laboratory practices should always be used. Avoid long term
exposure to skin or by inhalation.
FIRST AID:

SKIN: Wash exposed area with soap and water. If irritation persists, seek medical attention. EYES: Wash eyes with plenty of water for at least 15 minutes, lifting lids occasionally. Seek medical attention.
INHALATION: Remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen.

INGESTION: If swallowed, induce vomiting immediately after giving two glasses of water. Never give anything by mouth to an unconscious person

B

Generally not hazardous in normal handling, however good laboratory practices should always be used. Avoid long term
exposure to skin or by inhalation.
FIRST AID:

SKIN: Immediately flush skin with plenty of soap and water for at least 15 minutes. Remove contaminated clothing and shoes.
Wash clothing before reuse. Thoroughly clean shoes before reuse.
Get medical attention if irritation develops.

EYES: Wash eyes with plenty of water.
INHALATION: Remove to fresh air. Get medical attention for any breathing difficulty. INGESTION: Not expected to require first aid measures. If large amounts were swallowed, give water to drink and get medical advice.

C

Generally not hazardous in normal handling, however good laboratory practices should always be used. Avoid long term exposure to skin or by inhalation.
FIRST AID:
SKIN: Wash exposed area with soap and water. If irritation persists, seek medical attention.
EYES: Wash eyes with plenty of water for at least 15 minutes, lifting lids occasionally. Seek medical attention.

INHALATION: Remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen.
INGESTION: Give several glasses of milk or water. Vomiting may occur spontaneously, but it is not necessary to induce.

Never give anything by mouth to an unconscious person.

D

Generally not hazardous in normal handling, however good laboratory practices should always be used. Avoid long term
exposure to skin or by inhalation. FIRST AID:
SKIN: Wash exposed area with soap and water. If irritation persists, seek medical attention.
EYES: Wash eyes with plenty of water for at least 15 minutes, lifting lids occasionally. Seek medical attention.

INHALATION: Remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen.
INGESTION: Give several glasses of milk or water. Vomiting may occur spontaneously, but it is not necessary to induce.

Never give anything by mouth to an unconscious person.

E

Generally not hazardous in normal handling, however good laboratory practices should always be used. Avoid long term exposure to skin or by inhalation.
FIRST AID:
SKIN: Not expected to require first aid measures.

EYES: Wash thoroughly with running water. Get medical advice if irritation develops. INHALATION: Not expected to require first aid measures.
INGESTION: If large amounts were swallowed, give water to drink and get medical advice.

F

Generally not hazardous in normal handling, however good laboratory practices should always be used. Avoid long term
exposure to skin or by inhalation.
FIRST AID:

SKIN: Not expected to require first aid measures.
EYES: Flush eyes with water for at least 15 min. See physician if irritation persists. INHALATION: Remove to fresh air. If breathing is difficult give oxygen. See physician. INGESTION: None needed for small amounts. For large amounts, if conscious, give milk to drink, induce vomiting, and call physician.

G

Generally not hazardous in normal handling, however good laboratory practices should always be used. Avoid long term
exposure to skin or by inhalation.
FIRST AID:

SKIN: In case of contact, immediately wash skin with plenty of soap and water for at least 15 minutes.
EYES: In case of eye contact, immediately flush with plenty of water for at least 15 minutes. INHALATION: If a person breathes in large amounts, move the exposed person to fresh air. INGESTION: If large amounts were swallowed, give water to drink and get medical advice.

H

Generally not hazardous in normal handling, however good laboratory practices should always be used. Avoid long termexposure to skin or by inhalation.
FIRST AID:
SKIN: In case of contact, immediately wash skin with plenty water for at least 15 minutes.

EYES: In case of eye contact, immediately flush with plenty of water.
INHALATION: If a person breathes in large amounts, move the exposed person to fresh air. INGESTION: Do not induce vomiting unless directed by medical personnel



Diamond FX Brush Soap

Sodium Palmitate
Sodium Cocoate
Aqua
Glycerine
Parfume ( fresh lime fragrance ) Sodium Chloride

Sodium Hydroxide Tetrasodium EdtaWeight: 100g PAO (36m)

How to use:

Dip your brush into the brush soap.

Rub the brush soap into the bristles. Rub the bristles in a circular, scrubbing motion in the palm of your free hand. ( Very delicate)

Once you have worked the brush soap thoroughly through the bristles, rinse the soap from the brush under warm, running water. It may take more than one application of soap if there is a lot of paint in the brush.

Remove excess water with a towel and allow the brushes to dry before using them again.

We advise, hanging your brushes to dry, or letting them dry on a clean towel.

www.diamondfx-faceart.eu

info@diamondfx-faceart.eu. Face and Body Paint and Special FX

Our brands